Indivision ECS & AGA

All Amiga computers
User avatar
Wariorr
Posts: 27
Joined: Fri Sep 24, 2021 12:10 pm
Location: My training hall

Indivision ECS & AGA

Post by Wariorr »


Ask mandingo, he did something and he seems to have his a600 adapters
I'm a great warrior of old lore.
User avatar
Miwod
Posts: 29
Joined: Fri Sep 24, 2021 11:46 am
Location: New year Party

Indivision ECS & AGA

Post by Miwod »


Sory, false alarm, madi is not there, I think I got it wrong with someone else
My name is Not Miwod. :!: :!: :!: :!: :!: :!: :!: :!:
Hover
Posts: 37
Joined: Mon Nov 16, 2020 11:31 am

Indivision ECS & AGA

Post by Hover »


What is this disc from the first photo placed on?
User avatar
SummerFLower
Posts: 29
Joined: Fri Sep 24, 2021 12:29 pm
Location: Summer land of joy and warm

Indivision ECS & AGA

Post by SummerFLower »


On Denise on the A600. Today this set has already arrived for me, maybe I will install it by the weekend, then I will upload photos.
i just strartedt to bloon this summer.
User avatar
Iknownothingatall
Posts: 27
Joined: Fri Sep 24, 2021 12:41 pm
Location: gone forever

Indivision ECS & AGA

Post by Iknownothingatall »


It's hard to get Indivision so far. Sometimes Jens will drop something, once a year, and maybe less often a little series and it's just V2. I also see dryness on ebay. Since an internal converter for HDMI is available (also for A600), Indivision loses its attractiveness. However, I like the analog image from the Amiga very much and I am very pleased with my Indivision V1. Look at how it sits on my A600 in my gallery. The advantage of the A600 is the possibility of placing the D-SUB15 in the place of the RF modulator (you need to desolder it first, you can do it with an ordinary transformer), while the Indi itself sits on the a604n extension (additional cost in the case of A600!). If you do not insist on VGA and you do not mind the "vein-image", maybe HDMI?
i know that i know nothing at all.
User avatar
Zenobi
Posts: 46
Joined: Tue Feb 02, 2021 10:18 pm

Indivision ECS & AGA

Post by Zenobi »

Today I was able to pre-run it, so far only in standard WB resolution (I didn't have time to play for a long time). Great picture. I just need some fastening to do this.
User avatar
Computeoguy
Posts: 33
Joined: Thu Sep 23, 2021 10:20 pm
Location: Computer company

Indivision ECS & AGA

Post by Computeoguy »


What scares me about this metal housing is that there are 230 V cables without any additional insulation! How well I can see it.
I't does not compute....
User avatar
MovieDirector@
Posts: 28
Joined: Fri Sep 24, 2021 12:22 pm
Location: Movie set

Indivision ECS & AGA

Post by MovieDirector@ »


The casing is grounded and usually closed, I have an RCD at home, heat shrink sleeves on the solder lugs / terminals, the wires go through the "strip" to the Meanwell RT-65B power supply.
I'm gonna direct a movie someday...
User avatar
NamelessOne
Posts: 27
Joined: Fri Sep 24, 2021 11:58 am
Location: The nameless city under earth

Indivision ECS & AGA

Post by NamelessOne »


But isn't the "strip" on the left side where all the cables pass through not made of metal?
I have no name and never will have.
alvin
Posts: 37
Joined: Thu Nov 19, 2020 8:30 am

Indivision ECS & AGA

Post by alvin »


It is made of metal, let's not get paranoid, I wrote about grounding, as you can see, and about the RCD. I used 1.5mm2 wires, it's not a heater so that they would melt.
Post Reply