Indivision ECS & AGA
Indivision ECS & AGA
Ask mandingo, he did something and he seems to have his a600 adapters
I'm a great warrior of old lore.
Indivision ECS & AGA
Sory, false alarm, madi is not there, I think I got it wrong with someone else
My name is Not Miwod.
Indivision ECS & AGA
What is this disc from the first photo placed on?
- SummerFLower
- Posts: 29
- Joined: Fri Sep 24, 2021 12:29 pm
- Location: Summer land of joy and warm
Indivision ECS & AGA
On Denise on the A600. Today this set has already arrived for me, maybe I will install it by the weekend, then I will upload photos.
i just strartedt to bloon this summer.
- Iknownothingatall
- Posts: 27
- Joined: Fri Sep 24, 2021 12:41 pm
- Location: gone forever
Indivision ECS & AGA
It's hard to get Indivision so far. Sometimes Jens will drop something, once a year, and maybe less often a little series and it's just V2. I also see dryness on ebay. Since an internal converter for HDMI is available (also for A600), Indivision loses its attractiveness. However, I like the analog image from the Amiga very much and I am very pleased with my Indivision V1. Look at how it sits on my A600 in my gallery. The advantage of the A600 is the possibility of placing the D-SUB15 in the place of the RF modulator (you need to desolder it first, you can do it with an ordinary transformer), while the Indi itself sits on the a604n extension (additional cost in the case of A600!). If you do not insist on VGA and you do not mind the "vein-image", maybe HDMI?
i know that i know nothing at all.
Indivision ECS & AGA
Today I was able to pre-run it, so far only in standard WB resolution (I didn't have time to play for a long time). Great picture. I just need some fastening to do this.
- Computeoguy
- Posts: 33
- Joined: Thu Sep 23, 2021 10:20 pm
- Location: Computer company
Indivision ECS & AGA
What scares me about this metal housing is that there are 230 V cables without any additional insulation! How well I can see it.
I't does not compute....
- MovieDirector@
- Posts: 28
- Joined: Fri Sep 24, 2021 12:22 pm
- Location: Movie set
Indivision ECS & AGA
The casing is grounded and usually closed, I have an RCD at home, heat shrink sleeves on the solder lugs / terminals, the wires go through the "strip" to the Meanwell RT-65B power supply.
I'm gonna direct a movie someday...
- NamelessOne
- Posts: 27
- Joined: Fri Sep 24, 2021 11:58 am
- Location: The nameless city under earth
Indivision ECS & AGA
But isn't the "strip" on the left side where all the cables pass through not made of metal?
I have no name and never will have.
Indivision ECS & AGA
It is made of metal, let's not get paranoid, I wrote about grounding, as you can see, and about the RCD. I used 1.5mm2 wires, it's not a heater so that they would melt.