retrocomp.org

Ask mandingo, he did something and he seems to have his a600 adapters

Sory, false alarm, madi is not there, I think I got it wrong with someone else

What is this disc from the first photo placed on?

On Denise on the A600. Today this set has already arrived for me, maybe I will install it by the weekend, then I will upload photos.

It's hard to get Indivision so far. Sometimes Jens will drop something, once a year, and maybe less often a little series and it's just V2. I also see dryness on ebay. Since an internal converter for HDMI is available (also for A600), Indivision loses its attractiveness. However, I like the analog image from the Amiga very much and I am very pleased with my Indivision V1. Look at how it sits on my A600 in my gallery. The advantage of the A600 is the possibility of placing the D-SUB15 in the place of the RF modulator (you need to desolder it first, you can do it with an ordinary transformer), while the Indi itself sits on the a604n extension (additional cost in the case of A600!). If you do not insist on VGA and you do not mind the "vein-image", maybe HDMI?

Today I was able to pre-run it, so far only in standard WB resolution (I didn't have time to play for a long time). Great picture. I just need some fastening to do this.

What scares me about this metal housing is that there are 230 V cables without any additional insulation! How well I can see it.

The casing is grounded and usually closed, I have an RCD at home, heat shrink sleeves on the solder lugs / terminals, the wires go through the "strip" to the Meanwell RT-65B power supply.

But isn't the "strip" on the left side where all the cables pass through not made of metal?

It is made of metal, let's not get paranoid, I wrote about grounding, as you can see, and about the RCD. I used 1.5mm2 wires, it's not a heater so that they would melt.