Writing ADF to real floppy

All Amiga computers
User avatar
Miwod
Posts: 29
Joined: Fri Sep 24, 2021 11:46 am
Location: New year Party

Writing ADF to real floppy

Post by Miwod »


I will write in a moment :) Thanks.

But on the LPT cable, the Amiga wgl does not interfere with the recording. I connect the floppy disk drive to the PC (the special one) and it should record.

After the NullModem cable, I need software on the Amiga.
My name is Not Miwod. :!: :!: :!: :!: :!: :!: :!: :!:
User avatar
Iwa
Posts: 32
Joined: Fri Sep 24, 2021 11:41 am
Location: Iwa Town

Writing ADF to real floppy

Post by Iwa »


Fact, I got it wrong with another program.
This is my little place of internet.
User avatar
Donotreadtis
Posts: 31
Joined: Fri Sep 24, 2021 11:39 am
Location: Africa

Writing ADF to real floppy

Post by Donotreadtis »


I have access to the CLI (from an XCopy disk). Will I be able to copy the commands from the WB 2 floppy to RAM and set the com port in the Amiga via CLI?

But I managed to run AExplorer with CLI (loadwb, later endcli), I changed the floppy disk from AmigaExplorer, I ran it, the window disappeared. So I understand that the port has been opened? But the PC cannot connect. I understand that the port on the Amiga is not properly set?
Africa, ohh my Africa...
User avatar
HelloThereAll
Posts: 26
Joined: Fri Sep 24, 2021 11:34 am
Location: Weekend

Writing ADF to real floppy

Post by HelloThereAll »


Set similarly on PC and it will work. Willing but the first adf will go.
Nobody here but me :?: :!:
User avatar
Catladyiscrazy
Posts: 32
Joined: Fri Sep 24, 2021 11:31 am
Location: Kitty Litter

Writing ADF to real floppy

Post by Catladyiscrazy »


I will check it tomorrow and let me know: D
Nothing here for now...
User avatar
Doggeboy0A
Posts: 31
Joined: Fri Sep 24, 2021 11:26 am
Location: nowhere

Writing ADF to real floppy

Post by Doggeboy0A »


and I have recorded floppy disks many times through the Amiga Explorer and you need AExplorer on the Amiga to make it work. Important - the null modem cable must be made as on the page according to the scheme. Otherwise there will be a mistake.
I'm good doggee
User avatar
NamelessOne
Posts: 27
Joined: Fri Sep 24, 2021 11:58 am
Location: The nameless city under earth

Writing ADF to real floppy

Post by NamelessOne »


I checked. Did not work. Pops up

But I was able to send files to the Amiga RAM disk via ADF Sender. But Amiga won't open them. I sent transwarp and transdisk. Amiga does not open. Error 121 pops up.
I have no name and never will have.
User avatar
BigAndSmallHills
Posts: 28
Joined: Fri Sep 24, 2021 12:02 pm
Location: Hills

Writing ADF to real floppy

Post by BigAndSmallHills »


I suggest that you give someone floppy disks and ADF to record it for you or buy yourself a cash.
Run for the hills, run for you life.
User avatar
Wariorr
Posts: 27
Joined: Fri Sep 24, 2021 12:10 pm
Location: My training hall

Writing ADF to real floppy

Post by Wariorr »


Maybe it will work? Is the type command on this floppy?

Have you picked up AExplorer?
I'm a great warrior of old lore.
User avatar
SanderoCaro
Posts: 24
Joined: Fri Sep 24, 2021 12:14 pm
Location: Car saloon

Writing ADF to real floppy

Post by SanderoCaro »


is the Type command. Thanks to everyone for help, but I managed: D
I played Workbench somehow via LPT cable and ADTWin program. When I booted WB it went: D
Sandero is good car :!:
Post Reply