retrocomp.org

I will write in a moment Thanks.

But on the LPT cable, the Amiga wgl does not interfere with the recording. I connect the floppy disk drive to the PC (the special one) and it should record.

After the NullModem cable, I need software on the Amiga.

Fact, I got it wrong with another program.

I have access to the CLI (from an XCopy disk). Will I be able to copy the commands from the WB 2 floppy to RAM and set the com port in the Amiga via CLI?

But I managed to run AExplorer with CLI (loadwb, later endcli), I changed the floppy disk from AmigaExplorer, I ran it, the window disappeared. So I understand that the port has been opened? But the PC cannot connect. I understand that the port on the Amiga is not properly set?

Set similarly on PC and it will work. Willing but the first adf will go.

I will check it tomorrow and let me know: D

and I have recorded floppy disks many times through the Amiga Explorer and you need AExplorer on the Amiga to make it work. Important - the null modem cable must be made as on the page according to the scheme. Otherwise there will be a mistake.

I checked. Did not work. Pops up

But I was able to send files to the Amiga RAM disk via ADF Sender. But Amiga won't open them. I sent transwarp and transdisk. Amiga does not open. Error 121 pops up.

I suggest that you give someone floppy disks and ADF to record it for you or buy yourself a cash.

Maybe it will work? Is the type command on this floppy?

Have you picked up AExplorer?

is the Type command. Thanks to everyone for help, but I managed: D
I played Workbench somehow via LPT cable and ADTWin program. When I booted WB it went: D