Core A1200 and some problems with software

All Amiga computers
User avatar
Iwa
Posts: 32
Joined: Fri Sep 24, 2021 11:41 am
Location: Iwa Town

Core A1200 and some problems with software

Post by Iwa »


Tomorrow I will take a peek inside when the enlargement comes.
This is my little place of internet.
User avatar
Oldgirls
Posts: 29
Joined: Fri Sep 24, 2021 12:17 pm
Location: Old home

Core A1200 and some problems with software

Post by Oldgirls »


The Amiga from Escom has a soldered cable from the bottom and often additional "prostheses" placed on the circuits.

The most likely thing is to take the float out of the screen and see it from below.
WE all are OLD.
User avatar
Yellohello
Posts: 28
Joined: Fri Sep 24, 2021 12:44 pm
Location: Happy place of dreams

Core A1200 and some problems with software

Post by Yellohello »


My escom had a normal CD like the rest of revision 2B
Hello there all.
User avatar
Oldlegends
Posts: 30
Joined: Fri Sep 24, 2021 12:58 pm
Location: storybook

Core A1200 and some problems with software

Post by Oldlegends »


I have a port on a ribbon exactly like in the picture.
There are no wires underneath.
Legend of old are still alive.
alvin
Posts: 37
Joined: Thu Nov 19, 2020 8:30 am

Core A1200 and some problems with software

Post by alvin »


In the Amiga Test Kit you can test if the RDY signal is working on your CD (it is needed in some games).
User avatar
Zenobi
Posts: 46
Joined: Tue Feb 02, 2021 10:18 pm

Core A1200 and some problems with software

Post by Zenobi »


Have you tried to rip broken floppy disks to ADF and test on emulator? Can you share them? I would call at home on a bare A1200 1D4 also from Escom.
User avatar
SanderoCaro
Posts: 24
Joined: Fri Sep 24, 2021 12:14 pm
Location: Car saloon

Core A1200 and some problems with software

Post by SanderoCaro »


My next problem was brought up in good time.
Amiga communication with the outside world :)

But all in order.
I put on the Wicherka and Lotus started up.
SWOS and WB still have problems (I think) with floppy disks.

WB shows 2 + 8MB, so I miss something 3MB on the right.
Maybe it is the fault of the drivers that I did not upload because I have no way to get into the Amiga.
Wicherek has an SD slot but no device in WB shows up after inserting the card.
I assume that I have to upload something to the Amiga.

It's time to embrace the second topic.
The fastest path is PC0, but I don't see a device like this: D
Sandero is good car :!:
User avatar
KillJoy
Posts: 29
Joined: Fri Sep 24, 2021 12:26 pm
Location: Island of sadness

Core A1200 and some problems with software

Post by KillJoy »


Thanks for the tip, Amiga Test Kit found no problems.
The memory test lasted a lot of minutes, I wasn't sure if he was testing over and over to see if he was going to quit, so I stopped after about 10-15 minutes.
Other components approx.

I got a CF on PCMCIA so I can transfer files from PC .... ufff.

But I still have a problem with this SWOS.
The one I have on the floppy disks does not work with the second floppy disk, so I took some ADFs and recorded two SWOS floppy disks on other media.
He took off, although I think he was struggling with the second one, but I chose the game menu.
Here's the problem again.
I chose Friendly -> National -> Europe and here the disk drive turned out ... tires the floppy disk in a circle.
i'm gonna kill all you joy.
User avatar
Yavin
Posts: 44
Joined: Wed Nov 18, 2020 7:57 am

Core A1200 and some problems with software

Post by Yavin »


I do not have ADF, I do not have SWOS floppy disks, but I recorded new ADF floppy disks neither with SWOS Unites - SWOS 2020 and I also have a problem with the second floppy disk (details in the previous comment).
User avatar
Catladyiscrazy
Posts: 32
Joined: Fri Sep 24, 2021 11:31 am
Location: Kitty Litter

Core A1200 and some problems with software

Post by Catladyiscrazy »


I was there on the bare a1200 lotus3 it worked normally - I turned off the cpu and gave it the original and it was oki.
Nothing here for now...
Post Reply