Modern LCD and Amiga

All Amiga computers
User avatar
Kilord
Posts: 29
Joined: Fri Sep 24, 2021 11:48 am
Location: Poland

Modern LCD and Amiga

Post by Kilord »


At 741MP, the image via SCART, unfortunately, shakes vertically, I advise you to avoid it, unless someone is very undemanding. The same as on most LG M1721A (I checked a total of 3 pieces and only one is OK - it must have different electronics than the others, so the lottery ...).
I'm from Poland in Euro.
User avatar
Doggeboy0A
Posts: 31
Joined: Fri Sep 24, 2021 11:26 am
Location: nowhere

Modern LCD and Amiga

Post by Doggeboy0A »


Any monitor that has vertical refresh from 50Hz works.

Horizontal refresh in VGA mode is about 30KHz (Amiga X 2 modes give us a VGA refresh - dblPAL, dblNTSC)

Most monitors have a vertical frequency of 56Hz. You need to find one that displays the image from 50Hz.

Such a monitor will work 90% with the Amiga.
I'm good doggee
User avatar
Valdor
Posts: 49
Joined: Wed Nov 11, 2020 9:28 am

Modern LCD and Amiga

Post by Valdor »


This is not true. 50Hz vertical deflection guarantees correct operation in PAL modes with scandoubler, without scandoubler only DblPAL and productivity modes will work for sure. To view PAL modes without scandoubler you need a monitor that can go down to 15kHz HSYNC. Few monitors displaying 31kHz / 50Hz correctly will display 15kHz / 50Hz.
User avatar
Yavin
Posts: 44
Joined: Wed Nov 18, 2020 7:57 am

Modern LCD and Amiga

Post by Yavin »


but my colleague Biologist asks for the image after the VGA pass-through, so it's about DblPAL, DbLNTST etc.
Hover
Posts: 37
Joined: Mon Nov 16, 2020 11:31 am

Modern LCD and Amiga

Post by Hover »


After the passage without scandoubler with an indication of the previous thread about 15kHz monitors.
User avatar
SanderoCaro
Posts: 24
Joined: Fri Sep 24, 2021 12:14 pm
Location: Car saloon

Modern LCD and Amiga

Post by SanderoCaro »


and has anyone tested the HP Compaq LA2206xc maybe?
from the initial clicking on the menu, I see that you can set any refresh in principle.
Sandero is good car :!:
User avatar
HelloThereAll
Posts: 26
Joined: Fri Sep 24, 2021 11:34 am
Location: Weekend

Modern LCD and Amiga

Post by HelloThereAll »


Set it to 1Hz and check if it really works
You don't have a grommet to check with the Amiga?
Nobody here but me :?: :!:
User avatar
MovieDirector@
Posts: 28
Joined: Fri Sep 24, 2021 12:22 pm
Location: Movie set

Modern LCD and Amiga

Post by MovieDirector@ »


I don't have one. But I have 2 monitors in which you can click vertically, horizontally in the range from 0. vertically to 1, I have an image of the eccentric to the left and some letters and edges are blurred. but slightly.
I will take both on SACP, maybe some kind soul will travel such a passage for testing.
I'm gonna direct a movie someday...
User avatar
Zenobi
Posts: 46
Joined: Tue Feb 02, 2021 10:18 pm

Modern LCD and Amiga

Post by Zenobi »


At SACP, we will test the cool. I always have a guide, but I will not borrow eggs outside the party, unfortunately because I need it
User avatar
Oldgirls
Posts: 29
Joined: Fri Sep 24, 2021 12:17 pm
Location: Old home

Modern LCD and Amiga

Post by Oldgirls »


when the idea burns out, I will get it.
WE all are OLD.
Post Reply