Page 11 of 12
Modern LCD and Amiga
Posted: Mon Oct 25, 2021 10:03 am
by Catladyiscrazy
A600 I wanted to improve the image by connecting my friend to a popular monitor. For this purpose I bought a vga adapter "AMiVGA - Amiga Video RGB DB23 to VGA" for my Dell U2410 from Allegro, only because I did not want to make such an adapter myself due to the lack of a buffering scaler, which is required with this monitor: /
The effect is slightly unsatisfactory, visible vertical stripes, regardless of what I set in the monitor or in the workbench, the distortions remain.
I changed the cisco power supply to the original one. The vga cable is org. and was equipped with this monitor. Can you do something about it, modify something?
Modern LCD and Amiga
Posted: Mon Oct 25, 2021 11:05 am
by Kilord
U2410f is like that with Amiga, these vertical stripes are visible to a different degree depending on the monitor firmware, Amiga version (or even art), power supply type, capacitor condition and graphics mode, I have 4 of these monitors and not all of them behave identically, on one, for example, it is not NTSC HiRes, but it is PAL!
on the earlier A1200 models the vertical stripes are more visible and additionally they are "enriched" with random white dots with shadows, the worst image I had on the A1200 rev.1B, and the best on 2B and 1D4 (from AT / Escom), A500 and A600 are less often attached and not I remember them to be somehow more visible.
This monitor does not require a buffered grommet, it runs on a straight line, without any electronics, but buffered is needed for some A2000 and A4000 models.
as for the power supply, I had the least interference on the linear / transformer power supply (the heavy, flooded 2.5A)
As for the modes, I remember that I made myself some optimal desktop for this monitor, so that there were no black frames and reduce the visibility of these stripes, I even managed to shoot almost perfectly, but it was a long time ago, I do not know if I will find this driver, since I have been using Voodoo3 under WB for a long time
Modern LCD and Amiga
Posted: Mon Oct 25, 2021 11:22 am
by ThisGuy01
Thanks for the answer, personally I have the newest A08 model of this monitor from the beginning, there were never any problems but amiga is a different story than pc or consoles.
Finally, I uploaded the drivers for various display modes to WB and tested them, no revelation. I read on the forums that the only option is to change the option in the "Pixel Clock" monitor, but after selecting it, after a few seconds it shows artifacts and so on until the screen is completely smashed into bushes. It helps to switch the source to another and go back to vga and then I can see that all settings are reset. Well, the monitor is nice (a lot of outputs), but with my amiga, the image of the razor is unlikely to be.
UJP gave me a thought about buffering this monitor, in days I will make my own adapter without a scaler and see what happens.
Modern LCD and Amiga
Posted: Mon Oct 25, 2021 11:46 am
by KillJoy
Sorry for offtop, but not to post a new topic or something like this:
HDMI Converter for Nintendo 64 / SNES / NGC Gamecube 1080P
could go with the Amiga. Since it works all the way from SNES, RGB there would be max.
I think I will order because I have N64 and GameCube. To be played on the original Goldeneye64, a masterpiece game.
Modern LCD and Amiga
Posted: Mon Oct 25, 2021 12:19 pm
by Zenobi
Hello
Does anyone know if EIZO L365 will work with Amiga after VGA (without Scandoubler)?
Modern LCD and Amiga
Posted: Mon Oct 25, 2021 1:12 pm
by Yellohello
You probably watched the video on YT hooking it to the A3000 with the factory scandoubler?
Modern LCD and Amiga
Posted: Mon Oct 25, 2021 3:11 pm
by PanzerGeneral
No, I just noticed that it is close to me for PLN 30 and so I thought whether it would work
Thank you very much for the answer - I let it go.
I have a Samsung 710MP - it has a blurry image quite strongly - it is not sharp.
I can buy 711MP - Is it better on it than 710MP?
Modern LCD and Amiga
Posted: Mon Oct 25, 2021 4:53 pm
by BigAndSmallHills
In my opinion, the image on 711mp is better.
Modern LCD and Amiga
Posted: Mon Oct 25, 2021 5:50 pm
by Valdor
Hello everyone,
Are there monitors over 27 inches on the market that work with the Amiga 1200/600/500 using a VGA adapter?
Modern LCD and Amiga
Posted: Mon Oct 25, 2021 6:51 pm
by Iwa
Are there monitors over 27 inches on the market that have a VGA input?