But on the LPT cable, the Amiga wgl does not interfere with the recording. I connect the floppy disk drive to the PC (the special one) and it should record.
After the NullModem cable, I need software on the Amiga.
I have access to the CLI (from an XCopy disk). Will I be able to copy the commands from the WB 2 floppy to RAM and set the com port in the Amiga via CLI?
But I managed to run AExplorer with CLI (loadwb, later endcli), I changed the floppy disk from AmigaExplorer, I ran it, the window disappeared. So I understand that the port has been opened? But the PC cannot connect. I understand that the port on the Amiga is not properly set?
and I have recorded floppy disks many times through the Amiga Explorer and you need AExplorer on the Amiga to make it work. Important - the null modem cable must be made as on the page according to the scheme. Otherwise there will be a mistake.
But I was able to send files to the Amiga RAM disk via ADF Sender. But Amiga won't open them. I sent transwarp and transdisk. Amiga does not open. Error 121 pops up.
is the Type command. Thanks to everyone for help, but I managed: D
I played Workbench somehow via LPT cable and ADTWin program. When I booted WB it went: D